Removing And Installing The Midplane Board; Removing The Midplane Board; Figure 58. Installing The Intel Rmm3 Filler Panel - Intel SR1625UR - Server System - 0 MB RAM Service Manual

5. Install the Intel
6. Install the processor air duct. For instructions, see
Duct" on page
7. Install the PCI riser assembly into the server system. For instructions, see
"Installing the PCI Riser Assembly" on page

Removing and Installing the Midplane Board

The following sections describe how to replace the midplane board.

Removing the Midplane Board

To remove the midplane board, follow these steps:
1. Remove the PCI riser assembly. For instructions, see
Assembly" on page
2. Remove the processor air duct. For instructions, see
Duct" on page
3. Disconnect all cables from the midplane board.
4. Remove the bridge board as follows:
a. Open the bridge board connector retention clips on the midplane and server
b. Disconnect the bridge board from the connector on the midplane and server
70
®
RMM3 filler panel into the system back panel (see
Figure 58. Installing the Intel
49.
43.
48.
board.
board and lift the bridge board straight up.
®
RMM3 filler panel
"Installing the Processor Air
44.
"Removing the PCI Riser
"Removing the Processor Air
®
Intel Server System SR1625UR Service Guide
Figure 58).
AF002998