Callout
B.
C.
D.
E.
F.
G.
Standard Control Panel
The following diagram shows the features available on the standard control panel. For
instructions on installing the standard control panel, see
page
86.
20
Feature
System Identification
Solid blue indicates system identification is active.
LED
No light indicates system identification is not activated.
System Status LED
Solid green indicates normal operation.
Blinking green indicates degraded performance.
Solid amber indicates a critical or non-recoverable condition.
Blinking amber indicates a non-critical condition.
No light indicates POST is running or the system is off.
Power/Sleep LED
Continuous green light indicates the system has power applied to
it or the system is in ACPI S0 state.
Blinking green indicates the system is in sleep or ACPI S1 state.
No light indicates the power is off or the system is in ACPI S4 or
S5 state.
Power/Sleep Button
Powers on/off the system.
If enabled by an ACPI-compliant operating system, this button
puts the system in an ACPI sleep state .
NMI Button
Puts the server in a halt-state for diagnostic purposes and allows
you to issue a non-maskable interrupt. After issuing the interrupt,
a memory download can be performed to determine the cause of
the problem.
System Identification
Turns on/off the system identification LED.
Button
Figure 10. Mini Control Panel
A
B
C
D
E
F
L
K
J
®
Intel
Server System SR1625UR Service Guide
Function
"Replacing the Control Panel" on
G
H
I
TP02213