Installing And Removing A Slimline Optical Drive; Installing A Slimline Optical Drive; Figure 48. Installing The Plastic Guide To The Optical Drive - Intel SR1625UR - Server System - 0 MB RAM Service Manual

Installing and Removing a Slimline Optical Drive

Cautions: The slimline optical drive is NOT hot-swappable. Before removing or replacing the drive,
you must first take the server out of service, turn off all peripheral devices connected to
the system, turn off the system by pressing the power button, and unplug the AC power
cord from the system or wall outlet.
To maintain proper system cooling, a filler blank must be installed if you do not install a
device at this location.

Installing a Slimline Optical Drive

To install the slimline optical drive, follow these steps:
1. Install the plastic guide onto the rear of the optical drive and attach with two screws
as shown in
2. Insert the optical drive tray assembly into the server system opening and push all
the way until it stops (see
3. Make sure that the back end of the device plugs into the matching socket on the
backplane.
62
Figure 48.

Figure 48. Installing the Plastic Guide to the Optical Drive

Figure
TP02233
49).
®
Intel Server System SR1625UR Service Guide