Front of Server System
Peripheral Devices
The server system provides locations and hardware for installing hard drives, CD-ROM
drive, or DVD-ROM drive. The drives must be purchased separately. The following figure
shows the available options.
A
.
Hard Disk Drives
The server system supports 2.5 inch SAS or Serial ATA (SATA) hot-swap drives. The
system can support:
•
Up to eight 2.5 inch hard drives with the mini control panel.
•
Up to six 2.5 inch hard drives with the standard control panel or the Intel
Control Panel.
For instructions on installing hard drives, see
Drive" on page
Note: Drives can consume up to 17 watts of power each. Drives must be specified to run at a
maximum ambient temperature of 45
Note: The Intel
drives. For a list of supported hard drives, use the Server Configurator Tool. For a web
link to this tool, see
18
A.
Rack Handles
B.
Slimline Optical Drive
C.
Mini Control Panel
D.
Hard Disk Drive Bays (Optional HDD
Carriers shown)
Figure 9. Front Panel Features and Peripherals
59.
®
Server System SR1625UR does not support all SAS or Serial ATA (SATA) hard
"Additional Information and Software" on page
B
D
"Installing and Removing a Hot-swap Hard
C.
°
®
Intel
Server System SR1625UR Service Guide
A
C
TP02217
®
Local
3.