Installing and Removing the RAID Battery
Backup Unit (BBU)
Installing the RAID Battery Backup Unit
1. Observe the safety and ESD precautions at the beginning of this book. See
Information".
2. Power down the server and unplug all peripheral devices and the AC power
cable(s).
3. Remove the server system cover. For instructions, see
Cover".
4. Remove the large air baffle. For instructions, see
5. Insert the RAID battery backup unit into the server system and slide back until it
locks into place as shown in the figure below (see letter "A").
6. Attach the cable from the rear of the RAID battery backup unit to the mid-plane
board as shown (see letter "B").
7. Install the large air baffle. For instructions, see
8. Install the server system cover. For instructions, see
Cover".
Intel® Server System SR2500AL User's Guide
Figure 69. Installing the RAID Battery Backup Unit
"Removing the System
"Removing the Large Air
A
B
AF000149
"Installing the Large Air
"Installing the Server System
"Safety
Baffle".
Baffle".
79