Figure 35. Installing The Memory - Intel SR1625UR - Server System - 0 MB RAM Service Manual

3. Locate the DIMM sockets (see
4. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the
open position (see letter "A" in
5. Holding the DIMM by the edges, remove it from its anti-static package.
6. Position the DIMM above the socket. Align the notch on the bottom edge of the
DIMM with the key in the DIMM socket (see letter "B" in
pointing to the key in the socket).
7. Insert the bottom edge of the DIMM into the socket .
8. When the DIMM is correctly positioned, push down on the top edge of the DIMM
until the retaining clips snap into place (see letter "C" in
9. Make sure the clips are firmly in place (see letter "D" in
®
Intel Server System SR1625UR Service Guide
C
E
D
A
DIMM F1
DIMM F2
DIMM E1

Figure 35. Installing the Memory

Figure 35).
DIMM B2
DIMM A1
DIMM A2
B
DIMM D2
DIMM D1
DIMM E2
Figure 35).
DIMM B1
DIMM C2
DIMM C1
AF002884
Figure 35 - the arrow is
Figure 35).
Figure 35).
51