3. Connect all the power cables coming from the power supply to the server board.
4. Install the system fan assembly. For instructions, see
Assembly" on page
5. Install the bridge board. or instructions, see step 8 in
Board" on page
6. Install memory. For instructions, see
7. Install processor(s). For instructions, see
8. Install processor heatsink(s). For instructions, see
page
9. If necessary, install the I/O expansion module. For instructions, see
I/O Expansion Module" on page
10. If necessary, install the Intel
RMM3" on page
11. Connect SATA cables to the server board if applicable.
12. Connect all additional cables to the server board as necessary.
80
Figure 67. Installing the Server Board
92.
71.
55.
66.
B
A
"Installing DIMMs" on page
"Installing the Processor" on page 52
"Installing the Heatsink" on
64.
®
RMM3. For instructions, see
®
Intel
Server System SR1625UR Service Guide
AF002864
"Installing the System Fan
"Installing the Midplane
50.
"Installing the
"Installing the Intel
®