Installing The Replacement Pci Express* Riser Card; Installing And Removing A Pci Add-In Card; Installing A Pci Add-In Card; Figure 30. Installing The Replacement Pci Express* Riser Card - Intel SR1625UR - Server System - 0 MB RAM Service Manual

Installing the Replacement PCI Express* Riser Card

To install the replacement PCI Express* riser card, follow these steps:
1. Disconnect any cables attached to any add-in cards.
2. Remove the PCI riser assembly. For instructions, see
Assembly" on page
3. Remove any add-in cards from the PCI riser connector. For instructions, see
"Removing a PCI Add-in Card" on page
4. Position the riser card in the assembly such the holes on the card and the assembly
align.
5. Secure the riser card using two screws (see
6. Install the PCI add-in card(s) if desired. For instructions, see
in Card" on page
7. Install the PCI riser assembly into the server system. For instructions, see
"Installing the PCI Riser Assembly" on page
8. Connect any cables to add-in cards that require them. See your add-in card
documentation for information and add-in card requirements.

Installing and Removing a PCI Add-in Card

The following sections describe how to install and remove a PCI add-in card.

Installing a PCI Add-in Card

To install a PCI add-in card, follow these steps:
1. Remove the PCI riser assembly. For instructions, see
Assembly" on page
46
43.

Figure 30. Installing the Replacement PCI Express* Riser Card

46.
43.
"Removing the PCI Riser
47.
Figure 30).
AF003041
"Installing a PCI Add-
44.
"Removing the PCI Riser
®
Intel Server System SR1625UR Service Guide