7. If installed, remove memory, processor heatsink(s), and processor(s) from the
server board. For instructions, see
the Heatsink" on page
8. Remove the I/O expansion module, if installed.
9. Remove the Intel
10. Remove the nine screws from the server board (see letter "A" in
the server board from the server system (see letter "B" in
11. Install the replacement server board. For instructions, see
Board" on page
Installing the Server Board
To install the server board, follow these steps:
1. Place the server board into the server system (see letter "A" in
2. Attach the server board with nine screws (see letter "B" in
®
Intel
Server System SR1625UR Service Guide
"Removing DIMMs" on page 52
57.
®
RMM3, if installed.
A
Figure 66. Removing the Server Board
79.
Figure
Figure
66).
B
"Installing the Server
Figure
Figure
67).
and
"Removing
66) and lift
AF002863
67).
79