Removing The Processor; Figure 43. Removing The Heatsink - Intel SR1625UR - Server System - 0 MB RAM Service Manual

Removing the Processor

To remove the processor, follow these steps:
1. Remove the PCI riser assembly. For instructions, see
Assembly" on page
2. Remove the processor air duct. For instructions, see
Duct" on page
3. Remove the heatsink. For instructions, see
4. Unplug the processor fan cable from the server board.
5. Open the processor socket lever (see
6. Open the CPU load plate (see
7. Remove the processor.
8. If installing a replacement processor, see
Otherwise, install the protective socket cover over the empty processor socket.
58
B
3
A
2
4
TIM

Figure 43. Removing the Heatsink

43.
48.
Figure
1
C
"Removing the PCI Riser
"Removing the Processor Air
"Removing the Heatsink" on page
Figure 36).
37).
"Installing the Processor" on page
®
Intel Server System SR1625UR Service Guide
57.
52.