Installing The Pci Riser Assembly; Figure 28. Installing Pci Riser Assembly Into The Server System - Intel SR1625UR - Server System - 0 MB RAM Service Manual

a. If you removed the PCI riser assembly for another procedure, continue with that

Installing the PCI Riser Assembly

To install the PCI riser assembly, follow these steps:
1. Lower the riser assembly into place (see letter "A" in
2. Align the two hooks in the riser assembly with the matching slots at the back of the
server system (see letter "B" in
3. Press down uniformly until the two hooks on the rear of the PCI riser assembly
engage the server system back panel slots. The riser cards will seat into the
matching sockets on the server board.
44
procedure.

Figure 28. Installing PCI Riser Assembly into the Server System

Figure
Figure 28).
B
A
B
Air Duct
Slot
®
Intel Server System SR1625UR Service Guide
28).
Hooks (2)
Riser Card
Edge Connector
Chassis
Slots (2)
PCI Riser
Socket
AF002852