Installing And Removing The Intel ® Remote Management Module 3; Rmm3; Figure 52. Removing The I/O Expansion Module From The Server System - Intel SR1625UR - Server System - 0 MB RAM Service Manual

5. Install the I/O expansion module filler panel(s) into the system back panel (see
letter "C" in

Figure 52. Removing the I/O Expansion Module from the Server System

6. Install the processor air duct. For instructions, see
Duct" on page
7. Install the PCI riser assembly into the server system. For instructions, see
"Installing the PCI Riser Assembly" on page
Installing and Removing the Intel
Management Module 3
Installing the Intel
To install Intel
1. Remove the PCI riser assembly. For instructions, see
Assembly" on page
2. Remove the processor air duct. For instructions, see
Duct" on page
66
Figure 52).
Snap
A
Standoff
B
Standoff
Hole
Server Board
Connector
49.
®

RMM3

®
Remote Management Module 3, follow these steps:
43.
48.
C
Filler Panel
"Installing the Processor Air
44.
®
Remote
"Removing the PCI Riser
"Removing the Processor Air
®
Intel Server System SR1625UR Service Guide
AF002856