Reinstalling The Mini Control Panel; Figure 76. Installing Control Panel Module Into The Server System - Intel SR1625UR - Server System - 0 MB RAM Service Manual

8. Install the mini control panel filler (see letter "C" in

Reinstalling the Mini Control Panel

Your system comes with a mini control panel installed. You can remove this and replace it
with a standard control panel or the Intel
standard control panel or the Intel
the mini control panel, follow the instructions below.
Note: If you reinstall the mini control panel, your system is now capable of supporting up to
eight 2.5" hard drives.
Caution: The control panel is NOT hot-swappable. Before removing or replacing the control panel,
you must first take the server out of service, turn off all peripheral devices connected to
the system, turn off the system by pressing the power button, and unplug the AC power
cord from the system or wall outlet.
To reinstall the mini control panel, follow these steps:
1. Disconnect the control panel cables from the backplane as shown (see letters "A"
and "B" in
2. Press the latch at the back of the control panel (see letter "C" in
the control panel forward to release it from the server system.
3. Slide the control panel out through the front of the server system as shown (see
letter "D" in
88
C
A

Figure 76. Installing Control Panel Module into the Server System

Figure 77).
Figure 77).
®
Local Control Panel. If your system has a
®
Local Control Panel installed and you wish to reinstall
®
Intel Server System SR1625UR Service Guide
Figure 76).
B a c k p la n
e
B
AF002952
Figure 77) and push