6. Install the power distribution board cover. For instructions, see
Power Distribution Module" on page
7. Install the processor air duct. For instructions, see
Duct" on page
8. Install the PCI riser assembly into the server system. For instructions, see
"Installing the PCI Riser Assembly" on page
Removing and Installing the Server Board
Removing the Server Board
To remove the server board, follow these steps:
1. If installed, remove the PCI riser assembly. For instructions, see
PCI Riser Assembly" on page
2. If installed, remove the processor air duct. For instructions, see
Processor Air Duct" on page
3. Disconnect the SATA cables from the server board, if applicable.
4. If installed, remove the bridge board. Remove the bridge board. For instructions,
see step 4 in
5. Remove the system fan assembly. For instructions, see
Assembly" on page
6. Disconnect all power cables coming from the power supply to the server board.
78
Figure 65. Removing the RAID Battery Backup Unit
49.
43.
48.
"Removing the Midplane Board" on page
91.
A
B
TP02258
84.
"Installing the Processor Air
44.
70.
"Removing the System Fan
®
Intel
Server System SR1625UR Service Guide
"Replacing the
"Removing the
"Removing the