Removing The I/O Expansion Module(S); Figure 51. Installing The I/O Expansion Module To The Server System - Intel SR1625UR - Server System - 0 MB RAM Service Manual

7. Install the processor air duct. For instructions, see
Duct" on page
8. Install the PCI riser assembly into the server system. For instructions, see
"Installing the PCI Riser Assembly" on page

Removing the I/O Expansion Module(s)

To remove the I/O expansion module, follow these steps:
1. Remove the PCI riser assembly. For instructions, see
Assembly" on page
2. Remove the processor air duct. For instructions, see
Duct" on page
3. Disconnect the I/O expansion module from the server board connector and the
standoffs and remove the module out of the server system (see letter "A" in
Figure
4. Remove the standoffs from the server board (see letter "B" in
®
Intel Server System SR1625UR Service Guide
Snap C
Standoff
B
Standoff
Hole
Server Board
I/O Connector 1

Figure 51. Installing the I/O Expansion Module to the Server System

49.
43.
48.
52).
A
Filler Panels
"Installing the Processor Air
44.
"Removing the PCI Riser
"Removing the Processor Air
Figure
AF002855
52).
65