Snmp-Server Enable Traps - Dell Catalyst 3130 Command Reference Manual

Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands

snmp-server enable traps

Use the snmp-server enable traps global configuration command on the switch stack or on a standalone
switch to enable the switch to send Simple Network Management Protocol (SNMP) notifications for
various traps or inform requests to the network management system (NMS). Use the no form of this
command to return to the default setting.
Syntax Description bgp
bridge [newroot]
[topologychange]
config
copy-config
cpu threshold
OL-12248-03
snmp-server enable traps [bgp | bridge [newroot] [topologychange] | cluster | config |
copy-config |cpu threshold | {dot1x [auth-fail-vlan | guest-vlan | no-auth-fail-vlan |
no-guest-vlan] } | entity | envmon [fan | shutdown | status | supply | temperature] | flash
[insertion | removal] | fru-ctrl | hsrp | ipmulticast | mac-notification | msdp | ospf
[cisco-specific | errors | lsa | rate-limit | retransmit | state-change] | pim
[invalid-pim-message | neighbor-change | rp-mapping-change] | port-security [trap-rate
value] | rtr | snmp [authentication | coldstart | linkdown | linkup | warmstart] |
storm-control trap-rate value | stpx [inconsistency] [root-inconsistency]
[loop-inconsistency] | syslog | tty | vlan-membership | vlancreate | vlandelete | vtp]
no snmp-server enable traps [bgp | bridge [newroot] [topologychange] | cluster | config |
copy-config |cpu threshold | {dot1x [auth-fail-vlan | guest-vlan | no-auth-fail-vlan |
no-guest-vlan] } | entity | envmon [fan | shutdown | status | supply | temperature] | flash
[insertion | removal] | fru-ctrl | hsrp | ipmulticast | mac-notification | msdp | ospf
[cisco-specific | errors | lsa | rate-limit | retransmit | state-change] | pim
[invalid-pim-message | neighbor-change | rp-mapping-change] | port-security [trap-rate] |
rtr | snmp [authentication | coldstart | linkdown | linkup | warmstart] | storm-control
trap-rate | stpx [inconsistency] [root-inconsistency] [loop-inconsistency] | syslog | tty |
vlan-membership | vlancreate | vlandelete | vtp]
(Optional) Enable Border Gateway Protocol (BGP) state-change traps.
Note
(Optional) Generate STP bridge MIB traps. The keywords have these
meanings:
•
•
(Optional) Enable SNMP configuration traps.
(Optional) Enable SNMP copy-configuration traps.
(Optional) Allow CPU-related traps.
This keyword is supported only when the IP services feature set is
enabled on the switch or stack master.
newroot—(Optional) Enable SNMP STP Bridge MIB new root traps.
topologychange—(Optional) Enable SNMP STP Bridge MIB topology
change traps.
Cisco Catalyst Blade Switch 3120 for HP Command Reference
snmp-server enable traps
2-693