Installing Edirectory - Novell NETWARE 6-DOCUMENTATION Manual

6 Select options.
Follow the online instructions to install the support pack.
During installation, the support pack might prompt you concerning extending the schema.
Although you have already extended the schema for eDirectory, you most likely need to
extend the schema for other functionality, such as Novell Licensing Services.
7 Take the server down, then restart it.
If you checked the Reboot Server option in Step 6, the server automatically restarts.

Installing eDirectory

1 (Conditional) If you are upgrading eDirectory, do the following:
1a In the AUTOEXEC.NCF file, comment out the lines that load virus scanners, database
applications such as Sybase* or Oracle*, backup applications, and other programs that
rely on files being continually open and volumes being mounted.
During the eDirectory installation, the software must dismount volumes so that trustee
assignments can be migrated.
Be aware that virus scanners and other programs might be embedded inside other
products, for example, ZENworks
1b Restart the server and verify that the programs and applications referred to in
are not running.
If you uncompress the volume you are installing eDirectory on, the install will finish
HINT:
quicker.
2 (Conditional) If you have an IP-only environment, load IPXSPX.NLM.
NWCONFIG.NLM looks to Btrieve* for the product list. Btrieve subsequently requires IPX
Loading IPXSPX.NLM allows Btrieve to load. When you reboot the server, IPXSPX.NLM does
not reload, so you have an IP-only environment again.
3 At the server console, load NWCONFIG.NLM.
4 Select Product Options > Install a Product Not Listed.
5 Press F3 (F4 if you're using RCONSOLE) > enter the path to the eDirectory files under the NW
directory, for example, SYS:\NW.
Follow on screen prompts concerning license agreements, the readme file, and tips.
After files are copied, the server automatically restarts and begins to install components for
ConsoleOne and Novell Certificate Server.
6 Enter the administrator's login name (for example, Admin.VMP).
IMPORTANT: This window might close before you enter this information. If it does, toggle
(Alt+Esc) to the screen and enter the information. Otherwise, the installation will not be
complete.
TM TM
, ManageWise , and BorderManager
14
TM
.
Step 1a
TM
.