Section 4.8, "(Windows Servers Only) Installing Edirectory And Imanager On The Same Machine; Webaccess; Section 4.10, "Blank Screen Or Missing Roles And Tasks; Section 4.11, "Time Out Setting For Dynamic Groups Returns An Error Message When The Time Out Is Set To A Value That Can Be Exceeded - Novell IMANAGER 2.7.3 - README 8-26-2010 Manual

4.8 (Windows Servers Only) Installing eDirectory and iManager
on the Same Machine
If you want to install eDirectory and iManager on the same physical machine, you must install
eDirectory before you install iManager. This allows eDirectory to perform the initial system
configuration as required.
4.9 (Windows Servers Only) iManager Doesn't Work after
Installing Groupwise 7.0 WebAccess
®
On Windows 2000 and 2003 Server with IIS 5 or 6, installing Groupwise 7.0 WebAccess to IIS
automatically installs Tomcat 5.5.
As the iManager installation begins, the iManager installer program detects that IIS and Tomcat are
available for use. The installer reports the inability to stop the iisadmin service. Near the end of the
install, the installer reports the inability to start Tomcat.
After the install is completed, GroupWise WebAccess still works, but iManager does not (HTTP
404: Page not found).
Work around: Do not install iManager and GroupWise on the same Windows server.
4.10 Blank Screen or Missing Roles and Tasks
This most commonly occurs when accessing different versions of iManager with the same browser.
Resolve this problem by clearing the browser's stored cookies and cache and restarting the browser.
4.11 Time Out Setting for Dynamic Groups Returns an Error
Message when the Time Out Is Set to a Value That Can Be
Exceeded
When this occurs, the following message appears:
Unknown meaning for error number -
, but the value is saved. When you access Dynamic
6016; Please call a Novell provider
Groups, another error message appears:
The system encountered an unknown error. Please
contact Novell support.
The workaround is to give the Time Out setting an adequate and reasonable value.
4.12 Special Characters
iManager does not escape special characters automatically. Using a special character in an object
name will cause an error unless you manually escape the character. More information is available in
the iManager documentation (http://www.novell.com/documentation/imanager27/
imanager_admin_27/data/bovjgnu.html).
iManager 2.7.3 Field Patch (FTF) 4 Readme 9