Novell NETWARE 6-DOCUMENTATION Manual page 860

Windows 2000 and Windows NT Workstation
60
Storage Management Services Administration Guide
Make sure that the NT TSA is installed and configured. It is a part of the
Novell Client modules (checkbox for Novell Target Service Agent).
The Windows NT TSA has two parts:
TSA Service (TSAMAIN.EXE) is a service that waits for and acts when
there is a request from the backup engine.
TSAPrefs (TSAPREFS.EXE) allows an NT administrator to set
preferences and monitor the activities of the TSA Service.
1
Right-click Network Neighborhood and then click Properties > Novell
Target Service Agent > Properties.
2
Click Preferences and fill in the following fields:
Workstation: Enter the name of the workstation.
Preffered Server: Enter the name of the server on which you want to
connect. This server must have TSAProxy installed.
Protocol: Select SPX/IPX or TCP/IP.
Events to Log: Check the items you want to log: Connection,
Registration, Security, or Service.
Allow Backup User: This grants the backup user rights depending on the
group.
Auto Register: This automatically registers the Windows workstation
with the server after you restart.
3
Click Registration.
4
Check the fields in the Registration page and, if correct, click Register.
If information in any of the fields is incorrect, click Withdraw and return
to the Preferences page to change the information. Then repeat Steps 4
and 5.
5
Click Connections.
6
Check the fields in the Connections page and then click OK.
If you need to add or change information, click Apply.
You can also delete connections in this page under Current Connections
and then click Apply.