Configuring Multiple Logical Networks; Configuring For Auditing - Novell NETWARE 6-DOCUMENTATION Manual

Configuring Multiple Logical Networks

Configuring for Auditing

104 Novell DNS/DHCP Management Utility Administration Guide
2
Select the desired Subnet Address Range and ensure that the range type
is set to Dynamic BOOTP and DHCP or Dynamic DHCP.
3
Set the DNS update option to Always Update.
4
Click Save.
When you configure multiple logical networks, also known as virtual local
area networks (VLANs), you associate each individual LAN or Subnet object
with a Subnet Pool object. The Subnet object you associate with the Subnet
Pool object can be created prior to creating the Subnet Pool object, or an
existing subnet can be modified.
To configure multiple logical networks or VLANs, complete the following
steps:
1
Create a Subnet Pool object.
For detailed information about creating a Subnet Pool object, refer to
"Creating a Subnet Pool Object" on page
2
Select a Subnet object or create and configure a new Subnet object.
3
Click Subnet Pool Management > Modify Subnet Pool and add the subnet
to the subnet pool with which to associate the subnet object.
4
Click OK.
5
Repeat Step 2 through
the Subnet Pool object.
You configure DNS and DHCP for auditing by using the DNS/DHCP
Management Utility as described in:
"Configuring DNS Auditing" on page 105
"Viewing the DNS Audit Trail Log" on page 105
"Viewing the DNS Event Log" on page 106
"Configuring DHCP Auditing" on page 108
"Viewing the DHCP Audit Trail Log" on page 108
"Viewing the DHCP Event Log" on page 110
101.
Step 4 for each subnet you want to associate with