Novell NETWARE 6-DOCUMENTATION Manual page 968

3
Load SBCON.
See "Loading SBCON" on page
4
Select Main Menu > Job Administration > Restore.
The Restore Options screen appears.
5
Select Target Service and then the NetWare server running your backup
and restore Target Services Agent.
This is the name of the server or workstation on which you want to restore
your data. Before selecting it, you must load the correct TSA. See
"Loading the Target Service Agents" on page
If you do not see the target you want on the list, check for these possible
causes:
The proper TSA is not loaded on the target.
Network traffic is heavy. In these circumstances, it might take
SBCON a few moments to detect all the targets. Press Esc to return
to the Main Menu, and then press Enter again. Your target should
now be listed. From the Target Services list, select a target.
If the target you select has more than one TSA loaded, SBCON shows
you a list of their full names in the Backup/Restore Target Services on
This Server.
NOTE:
When you are trying to connect to a different server, SBCON uses the
same username and password you gave the first time. It prompts only if it fails.
The following table lists the target services and their associated datasets.
Target Service to Restore
Cluster-enabled pool
File system
eDirectory database
46.
Dataset to Select
The cluster-enabled pool that you backed up
The server whose file system you want to restore
The server with TSANDS loaded
45.
Setting Up
63