Dhcpsrvr Command Line Options - Novell NETWARE 6-DOCUMENTATION Manual

DHCPSRVR Command Line Options

Table 10
112 Novell DNS/DHCP Management Utility Administration Guide
Parameter
-q
-r <zone name>
-rp <characters>
-s [zone name]
-u <file.dat>
-v
-zi <zone name>
You can issue the LOAD NAMED command repeatedly to invoke different
command line options. The NAMED.NLM software is loaded only on the first
instance.
To start a DHCP server, enter the following command at the server console
prompt:
LOAD DHCPSRVR
The command line parameters listed in the following table are also supported.
DHCPSRVR Command Line Options
Parameter
-d1
-d2
Function
Disables verbose mode for debug messages
(default setting)
Deletes and removes an existing zone from the
zone database
Replaces listed characters with a dash (-) in host
names for which resource records are
dynamically created
Prints status information; zone name is optional
Imports file.dat and updates the contents of a
previously created zone
Enables verbose mode for debug messages
Forces named zone for zone-in transfer
Function
Turns on a background screen log of DHCP
packets
Turns on a background screen log of Debug
statements and DHCP packets