Novell NETWARE 6-DOCUMENTATION Manual page 1316

Getting the UNIX information from Remote NIS
For file system sharing by NFS server, the UNIX user and group information
is obtained from eDirectory by default. This can be modified so that UNIX
information is obtained from a remote NIS server. To set this, do the
following:
1
Run NFSSTOP.
2
Set the parameters in the NFS.CFG file as follows by following Steps 1
to 5 in "Configuring the Server General Parameters" on page
NDS_ACCESS=0
NIS_CLIENT_ACCESS=1
NIS_DOMAIN= nis domainname
NIS_SERVER= servername which is servicing the specified domain
3
Run NFSSTART.
4
Load NFSSERV.
Starting and Stopping NFS Server from ConsoleOne
1
Click NFSAdmin and log in to the server that you want to administer.
2
Click the S icon on the toolbar to start/stop the NFS Server. The
background color of the S icon indicates the status of the NFS Server
Software.
Refreshing the Exported Paths View
If the NFSEXPRT file is modified outside ConsoleOne, then to view the
current contents of the file, do the following:
1
In the left panel of the ConsoleOne main menu, click the server that you
want to administer.
The Export icon appears in the right panel.
2
Right-click Exports and then click Refresh to view the currently exported
paths.
Working with UNIX Machines
73.
93