Viewing The Dhcp Options Table - Novell NETWARE 6-DOCUMENTATION Manual

Viewing the DHCP Options Table

90
Novell DNS/DHCP Management Utility Administration Guide
3
Click Next to open the Excluded Hardware Addresses list in the Global
DHCP Defaults window.
This list contains the MAC addresses of clients that should not receive IP
addresses from DHCP servers. These exclusions apply to all DHCP
servers in the eDirectory tree.
4
Click Next to open the Included Hardware Addresses list in the Global
DHCP Defaults window.
This list contains the MAC addresses of clients that will receive IP
addresses from DHCP servers.
IMPORTANT:
The Excluded and Included Hardware Addresses lists are mutually
exclusive. You are expected to configure only one of these lists and ensure that the
other list is empty.
5
Click Add > Enter the MAC Address of the client > Specify the hardware
type.
6
Click OK.
The MAC address is added to the Excluded Hardware Addresses list.
The DHCP Options Table provides a list of parameters that can be defined for
use on the network. After an option is defined,you can assign a value to the
option using Global DHCP Options.
To view a DHCP option:
1
Click DHCP Management > Global DHCP Configuration to open the
Global DHCP Configuration window in the main panel.
2
Select Set Global Preferences from the drop-down menu > click OK to
open the Global DHCP Preferences window.
3
Click Next > Next to open the DHCP Options Table window that lists
both the system-defined and user-defined DHCP options.
4
Click Done to return to the home page.