Modifying A Subnet Address Range Object - Novell NETWARE 6-DOCUMENTATION Manual

Modifying a Subnet Address Range Object

98
Novell DNS/DHCP Management Utility Administration Guide
Set Boot Parameter Options: Check this to specify the Server
Address, Server Name, and Boot File Name for the BOOTP service.
This information, provided at boot time, includes the address and
name of a server the client can contact for a boot image, as well as a
boot filename.
Other DHCP Options: To configure an option, complete the
following steps:
Click Modify to open the DHCP options page that list the
available DHCP Options.
Select the DHCP option and provide the necessary DHCP
information.
Click Add.
To remove a DHCP option:
Check the Select column of the DHCP option you want to
remove > click Delete
Refer to "Creating Subnet Address Ranges" on page 92
creating a Subnet Address Range object. After a Subnet Address Range object
has been created, you can modify its configuration parameters by completing
the following steps:
1
Click DHCP Management > Address Range Management to open the
Address Range Management window in the main panel.
2
Select Modify Address Range from the drop-down menu > click OK to
open the Modify Subnet Address Range window.
3
From the Select Subnet drop-down menu, select the subnet that contains
the address range to be modified.
4
From the Select Address Range drop-down menu, select the address
range to be modified.
5
Click OK.
You are led through a set of steps by which you can modify the following
address range parameters:
Range Type: indicates the range of addresses used by the DHCP
server in response to requests from clients.
for information about