Modifying A Zone Object - Novell NETWARE 6-DOCUMENTATION Manual

Modifying a Zone Object

82
Novell DNS/DHCP Management Utility Administration Guide
9
Click Create.
A message indicates that the new Secondary IN-ADDR.ARPA Zone
object has been created.
After you have created a Zone object, you can modify it and provide more
detailed configuration information.
To modify a new Zone object's attributes, complete the following steps:
1
Click DNS Management > Zone Management to open the Zone
Management window in the main panel.
2
Select Modify Zone from the drop-down menu > click OK to open the
Modify DNS Zone window.
3
Select the DNS Zone object from the drop-down menu.
4
Click OK.
You can now modify the following DNS Zone configuration parameters:
Zone Type: Specifies whether the zone will be a Primary or a Secondary
zone.
Zone Master IP Address: To change a Primary zone to a Secondary zone,
click the Secondary zone box and provide the IP address of the Primary
DNS Server in the Zone Master IP Address field.
Available DNS Servers: Specify the server to which the zone is to be
assigned > click Add. The server will then be displayed in the
Authoritative DNS Servers field.
Authoritative DNS Servers: To delete a DNS server assignment to a zone,
select the server to be removed from the field, then click Remove.
Add All: Click this to add available DNS servers to a zone.
Remove All: Click this to remove available DNS servers from a zone.
Designated DNS Server: Designates a server for the zone if more than one
DNS server is assigned to a zone. This server will be responsible for
getting DHCP updates for the zone, if the zone is a Primary zone.
Comments: Use this field to provide comment information about the
zone. This is an optional parameter.