Installing The Software During The Server Installation; Installing The Software After Server Installation; Before You Begin; Accessing The Software - Novell NETWARE 6-DOCUMENTATION Manual

Installing the Software during the Server Installation

Installing the Software after Server Installation

Before You Begin

Accessing the Software

18
Novell Native File Access Protocols Installation and Administration Guide
Novell Native File Access Protocols are part of the NetWare 6 server
installation program. Instructions are located in the
Installation Guide.
If you did not install the software during the NetWare 6 server installation, you
can install it by following the steps beginning with
after Server Installation" on page
Novell Native File Access Protocols can installed after installing a NetWare 6
using NetWare Deployment Manager or the Graphical Server Console screen.
Each method provides an easy-to-follow installation program that guides you
through the required steps.
1
Obtain the NetWare 6 Operating System CD.
2
Make sure that your NetWare server meets the prerequisites described in
"NetWare Server Prerequisites" on page
3
Set up an Administrator Workstation by meeting the prerequisites
described in "Administrator Workstation Prerequisites" on page
From the NetWare 6 Server Console
1
At the NetWare 6 server console, enter STARTX to launch the graphical
server console.
2
Click Novell > Install.
3
From the Installed Products screen, click Add.
4
Enter the path to the NetWare 6 Operating System CD and select the
PRODUCT.NI file.
The installation program begins.
NetWare 6 Overview and
"Installing the Software
18.
15.
17.