Binding Protocols - Novell NETWARE 6-DOCUMENTATION Manual

Binding Protocols

52
NetWare TCP/IP Administration Guide
You can further set the detailed configuration of each of the above fields.
For more information of how to configure TCP/IP, see chapter
"Setting Up," on page
1
Load INETCFG and then click Binding.
2
Select a protocol.
Here you need to enter data in terms of Protocol, Interface/Group, Status
and Identifier. There might be instances when you need to enter data in
the screens still to come and that is reflected here.
3
Enter the relevant parameter information in the Binding TCP/IP to a LAN
interface screen and then click Configure TCP/IP Bind options.
4
Either set both the Group Interface for LB/FT and Set as Primary
Interface to Yes or set the first one to No.
Setting the first to No enables RIP Bind Options, OSPF Bind Options and
Expert TCP/IP Bind Options. Choose the relevant screen and enter the
data into it.
47.
Chapter 3,