Modifying Resource Records - Novell NETWARE 6-DOCUMENTATION Manual

Modifying Resource Records

84
Novell DNS/DHCP Management Utility Administration Guide
6
Choose the Resource Record Type (RR Type) from the available options
under the Others drop-down menu and enter appropriate Resource
Record data corresponding to the type chosen.
7
Click Create.
For more information on Resource Record Types, refer to
Record Types and Field Differences," on page
NOTE:
Start of Authority (SOA) is defined as part of a Zone object's attributes, and
a Pointer (PTR) record is created automatically when any new A resource record
or IPv6 (AAAA) resource record is created if the IN-ADDR.ARPA zone exists.
To modify a resource record, complete the following steps:
1
Click DNS Management > Resource Record Management to open the
Resource Record Management window in the main panel.
2
Select Modify Resource Record from the drop-down menu > click OK to
open the Modify RR Set - Resource Record window.
3
From the Select Domain drop-down menu, select the domain that
contains the host or RR Set.
4
From the Select Host drop-down menu, select the host or RR Set that
contains the Resource Record.
5
You can modify the properties of either the entire RR Set or a single
record in the RR Set.
To modify the RR Set, complete the following steps:
Click Modify RR Set to open the Modify RR Set window.
Enter the name of the eDirectory object to be associated with the RR
Set in the Associated eDirectory Object box, or browse to select it.
Optionally, type comments about the RR Set object in the Comments
box.
Click Done to close the Modify RR Set window.
To modify a single Resource Record, complete the following steps:
From the Select Resource Record drop-down menu, select the
Resource Record.
Click OK to view the domain, the hostname and the Type
information associated with the Resource Record.
Table 2, "Resource
33.