Set Parameters; Configuration Using Set Options; Arp Cache Stale Timeout - Novell NETWARE 6-DOCUMENTATION Manual

4

Configuration Using SET Options

ARP Cache Stale Timeout

SET Parameters

This chapter discusses how to use SET parameters to change some of the
default parameters or enable/disable the various features provided in Novell
TCP/IP stack.
The following SET options allow you to configure certain parameters from the
command line on the host. The SET options are entered at the server console
as commands, and the configuration changes made this way are applied to the
whole system rather than to an individual interface.
Syntax set arp entry expiry time = n
Description: Specifies a timeout period (in seconds) for a cache table entry
to be removed from the ARP cache table if the entry has not
been used for some time.
Range: 240 to 14400 (seconds)
Default: 300
SET Parameters
®
53