Configuring Xdasv2; Installing Edirectory Xdasv2 Files; Configuring Xdasv2 Property File - Novell XDASV2 - ADMINISTRATION GUIDE V1 Administration Manual

Configuring XDASv2

2
This chapter contains the following information:
Section 2.1, "Installing eDirectory XDASv2 Files," on page 11
Section 2.2, "Configuring XDASv2 Property File," on page 11
Section 2.3, "Configuring XDAS Events," on page 12
Section 2.4, "Loading the Modules," on page 12

2.1 Installing eDirectory XDASv2 Files

The following eDirectory XDASv2 files are, by default, installed as part of eDirectory.
Linux:
novell-edirectory-xdaslog
novell-edirectory-xdaslog-conf
novell-edirectory-xdasinstrument
Solaris:
NOVLlog
NOVLedirxdasin
Windows
xdasauditds.dlm
xdaslog.dll

2.2 Configuring XDASv2 Property File

The XDASv2 property file is located at
xdasconfig.properties
The following is the content of the XDASv2 property file:
# Set the level of the root logger to DEBUG and attach appenders.
#log4j.rootLogger=debug, S, R
# Defines appender S to be a SyslogAppender.
#log4j.appender.S=org.apache.log4j.net.SyslogAppender
# Defines location of Syslog server.
#log4j.appender.S.Host=localhost
#log4j.appender.S.Port=port
# Specify protocol to be used (UDP/TCP/SSL)
#log4j.appender.S.Protocol=UDP
# Specify SSL certificate file for SSL connection.
# File path should be given with double backslash.
#log4j.appender.S.SSLCertFile=/etc/opt/novell/mycert.pem
/etc/opt/novell/configuration/
. You can customize the file according to your requirement.
2
Configuring XDASv2 11