Setting Up Dhcp; Dhcp Prerequisites; Setting Global Dhcp Preferences - Novell NETWARE 6-DOCUMENTATION Manual

Setting Up DHCP

DHCP Prerequisites

Setting Global DHCP Preferences

88
Novell DNS/DHCP Management Utility Administration Guide
This section provides the following procedures required to accomplish a basic
DHCP setup:
"DHCP Prerequisites" on page 88
"Setting Global DHCP Options" on page 89
"Creating a DHCP Server Object" on page 91
"Creating a Subnet Object" on page 91
"Creating Subnet Address Ranges" on page 92
"Creating IP Address Objects" on page 92
"Loading the DHCP Server" on page 93
"Configuring Clients to Use DHCP" on page 94
This section does not describe how to enable all the available features. For
more information refer to
The following steps must be completed prior to setting up DHCP:
1. Load Netware 6 on the selected server or servers.
2. Install iManage.
3. Install Internet Explorer 5.0.
You can use Global Preferences to add, delete, or modify global data, such as
global DHCP options and global DHCP defaults. For more information about
setting global DHCP options, refer to
page 89. For more information about setting global DHCP defaults, refer to
"Setting Global DHCP Defaults" on page
configuring the DHCP Options Table, refer to
Table" on page 90.
"Detailed DHCP Configuration" on page 94
"Setting Global DHCP Options" on
89. For more information about
"Viewing the DHCP Options