Enabling Ndps On A Previously Installed Client; Adding Ndps Printers; Removing Capture Statements - Novell NETWARE 6-DOCUMENTATION Manual

Enabling NDPS on a Previously Installed Client

Adding NDPS Printers

Removing CAPTURE Statements

70
Novell Distributed Print Services Administration Guide
If you have previously installed the correct version of the Novell Client on one
or more Windows workstations but you did not enable NDPS at that time, you
will need to add go to your network properties and add the service Novell
Distributed Print Services.
On Windows 3.x workstations, you must reinstall the Client to enable NDPS.
For a discussion of how to add printers automatically to your NDPS client
workstations, see "Designating Printers to Be Automatically Installed" on
page 75.
You can install printers manually at individual workstations using the Add
Printer wizard.
Existing CAPTURE statements should be removed from your NDPS clients
for NDPS to be fully enabled. These statements might exist in container or
user login scripts, in batch files, or other locations. After you have tested your
new system thoroughly, you can safely remove these statements.