H1. Check The Printer's Spooling Configuration; H2. Reconfigure Spooling For This Printer; H3. Check The Job List For The Queue; H4. Make Sure The Job Is Being Redirected To The Queue Properly - Novell NETWARE 6-DOCUMENTATION Manual

H1. Check the printer's spooling configuration

H2. Reconfigure spooling for this printer

H3. Check the job list for the queue

H4. Make sure the job is being redirected to the queue properly

Make sure the printer is configured to service the queue you are expecting the
job to go to. See "Setting Print Job Spooling" on page 85
information.
The spooling configuration specifies a different queue than the one you want
this printer to service. See
information on how to configure job spooling.
Make sure the job is actually getting to the queue.
Many applications are not designed for network printing. CAPTURE is a
command line utility that configures print job redirection from applications
not designed for NetWare print services.
"Setting Print Job Spooling" on page 85
Troubleshooting Your Print System 133
for more
for