Configuration Settings; Edit Quorum Membership And Timeout Properties - Novell NETWARE 6-DOCUMENTATION Manual

Configuration Settings

Edit Quorum Membership and Timeout Properties

Click the Up- and Down-arrow buttons to change the failover order of the
3
servers assigned to the resource or volume.
Click Apply to save node assignment changes.
4
Using NetWare Remote Manager
On the left column under the Clustering section, click Cluster Config.
1
From the list of Resources, select the desired resource.
2
On the Resource Information screen, click Nodes.
3
Select or type in the nodes that you want assigned to this resource.
4
Click Apply to save node assignment changes.
5
Depending on your needs and cluster setup, some additional configuration
may be required for you to effectively use Novell Cluster Services. This
additional configuration might consist of changing the values on some of the
properties for the Cluster object and the Cluster Node objects.
You can edit Quorum Membership and Timeout properties using either
ConsoleOne or NetWare Remote Manager.
Using ConsoleOne
Right-click the Cluster object.
1
Click Properties.
2
Select the Quorum tab on the Cluster Object Property page.
3
Using NetWare Remote Manager
On the left column under the Clustering section, click Cluster Config.
1
Select the Cluster object name.
2
Click Quorum.
3
Installation and Setup
3 5