Installing Novell Native File Access Protocols; Netware Server Prerequisites - Novell NETWARE 6-DOCUMENTATION Manual

2

NetWare Server Prerequisites

Installing Novell Native File Access
Protocols
To install the Novell
following:
1. Prepare the NetWare 6 server according to the instructions in
Server Prerequisites" on page
2. Set up a client workstation following the instructions in
Workstation Prerequisites" on page
3. Make sure that the computers to access the network are running a
supported version of the operating system as described in
Prerequisites" on page
4. Install the software following the instructions in
after Server Installation" on page
After installing Novell Native File Access Protocols, you must create simple
passwords before users can access network resources. For instructions, see
Chapter 3, "Assigning Simple Passwords," on page
The server must have the following configuration to run Novell Native File
Access Protocols.
HINT:
Check the server configuration at the server console by entering
NWCONFIG; then select Product Options > View.
NetWare 6 server operating system
(For Macintosh only) Macintosh Name Space loaded on each traditional
volume before installing Novell Native File Access Protocols.
®
Native File Access Protocols, you must complete the
15.
17.
18.

Installing Novell Native File Access Protocols

17.
"Installing the Software
27.
"NetWare
"Administrator
"Computer
15