Managing; Ftp Server Startup - Novell NETWARE 6-DOCUMENTATION Manual

3

FTP Server Startup

Managing

This chapter discusses the following topics:
"FTP Server Startup" on page 25
"Using the FTP Server from an FTP Client" on page 26
"Administering the NetWare FTP Server" on page 33
The FTP Server software can be loaded from the NetWare
following command:
nwftpd
The server takes the default configuration file SYS:/ETC/FTPSERV.CFG. On
installation, this configuration file has all the parameters, commented, with
their default values.
To start the NetWare FTP Server software with a different configuration file
(for example, MYCONFIG.CFG), place the file in the SYS:/ETC directory
and enter the following at the command line:
nwftpd -c myconfig.cfg
NOTE:
If there is any change in the .CFG file, nwftpd should be reloaded.
®
server using the
25
Managing