Before Loading The Backup Software; Before Running The Backup Software; Customizing The Netware Server As The Backup Server - Novell NETWARE 6-DOCUMENTATION Manual

Before Loading the Backup Software

Before Running the Backup Software

Customizing the NetWare Server as the Backup Server

Before you load the backup software on the server or on a Windows machine,
you need to configure a server to execute your backups.
Determine the following:
The tree to which the server belongs which must be made the current tree
The full eDirectory
Before backing up software, in general you must:
Load the controller and storage device drivers on the server. See
Controller and Storage Device Drivers on the Server" on page
Load the TSAs on a server, workstations, or both. See
Target Service Agents" on page
Load the backup engine on the server or the workstation. See
SBCON" on page 46
SMS allows you to configure a NetWare
installing NetWare 6. It also allows you to create NDS
SMDR Group objects.
To customize the settings while running the Install program, do the following:
1
In the Final List of Products to be Installed dialog, click Customize.
2
Select Storage Management Services from the list of NetWare Services >
click Configure.
The SMS Setup dialog box with default values for NDS Backup Queue
and SMDR Group objects displays.
3
Enter the name of the eDirectory tree where the SMS objects will be
created.
4
Enter the name of the backup server and the context.
5
Accept the default for the SMDR Group context where the SMDR Group
object is to be created, or enter a new context.
context of the server
TM
45.
or "Loading NWBACK32" on page
®
server as a backup server while
"Loading
44.
"Loading the
"Loading
47.
®
Backup Queue and
43
Setting Up