Managing Print Jobs - Novell NETWARE 6-DOCUMENTATION Manual

4

Managing Print Jobs

Managing Printers
Although the default settings in Novell
®
(NDPS ) allow your users to print without further configuration being
necessary, you will probably want to modify some of those settings so that you
can manage your printing resources most effectively. While most tasks can be
done in iManage, some tasks will require you to use NetWare
This chapter discusses the following:
"Installing Printers on Workstations" on page 74
"Using Remote Printer Management" on page 75
"Setting Up Printer Configurations" on page 77
"Creating Configurations" on page 78
"Optimizing Event Notification" on page 82
"Setting Print Job Spooling" on page 85
"Supporting Queue-Based Client Workstations" on page 86
The following sections provide specific information about the NDPS print job
management features. All of the procedures listed below can be performed
either through NetWare Administrator or through the Novell Printer Manager.
Users designated as Managers or Operators for a printer can perform these
tasks for all jobs routed to that printer; individual job owners can only perform
these tasks for their own print jobs.
®
Distributed Print Services
Managing Printers
TM
®
Administrator.
71