Novell NETWARE 6-DOCUMENTATION Manual page 976

4e
Select Remove This Server from the Replica Ring.
4f
Enter the supervisor name and password.
4g
Select Yes to continue.
5
Exit DSREPAIR.
6
Reinstall NetWare.
6a
Begin the installation.
6b
When prompted for DS install, select Create a New DS Tree and
complete the installation.
6c
Load NWConfig and remove DS.
6d
Install DS, when prompted for DS install and select Install into an
Existing Tree.
6e
When prompted to choose a eDirectory tree structure, press F5.
This allows you to choose to restore the SERVDATA.NDS file to the
failed server.
6f
To specify the path where the SERVDATA.NDS file exists, press F3
and enter the path.
HINT:
If the information fits on a diskette, you can save the information on a
diskette instead of another server on the network.
6g
Press Enter to accept the path.
6h
Log in to the server that contains the SERVDATA.NDS file.
6i
Log in to the eDirectory database.
6j
If the START.NCF file of the failed server is different from the
default, you can edit the default file.
6k
You now can choose from the following:
To continue the install and not copy the files from install, but use
the backup tapes to finish restoring the information, press Enter.
To go back to the previous screen, press Esc.
To copy the files from install and then restore the files from tape,
press F3.
7
Restore the file system using "Restoring Data" on page 62.
71
Setting Up