Loading Sbcon; Prerequisites - Novell NETWARE 6-DOCUMENTATION Manual

Loading SBCON

Prerequisites

46
Storage Management Services Administration Guide
Loading the files when the server starts. Place the commands in the
server's STARTUP.NCF, and in the workstation's NET.CFG file,
AUTOEXEC.BAT file (for DOS), or Startup folder (for OS/2).
You can load SBCON from the server command line.
If you use NWBACK32 on a client, you do not need to load SBCON.
1
At the server console, enter
SMSSTART
TSA600.NLM, TSAPROXY.NLM, and SMDR.NLM modules are
loaded with default configuration values.
SBSC.NLM, QMAN.NLM, SMSDI.NLM and TSANDS.NLM must be
manually loaded on need basis; SBSC.NLM, QMAN.NLM,
SMSDI.NLM when storage devices are used, and TSANDS.NLM for
backup and restore of eDirectory.
2
Load SBCON by entering
LOAD SBCON
Controller and storage device drivers are loaded on the server.
See "Loading Controller and Storage Device Drivers on the Server" on
page 44.
SMDR.NLM, TSA600.NLM, SMSDI.NLM, QMAN.NLM, SME.NLM,
SBSC.NLM, and SBCON.NLM are installed on the server.
They should have been installed automatically during NetWare 6
installation.
Each NLM listed above is in the search path.
TM
TSA is loaded on each machine to be backed up.
See "Loading the Target Service Agents" on page 45.