Novell NETWARE 6-DOCUMENTATION Manual page 1191

138 Novell Distributed Print Services Administration Guide
4
In the Printer Agent Source field, select Create a New Printer Agent and
click Create.
5
Confirm the Printer Agent name (default is the name of the new printer
you are creating) and browse to select the NDPS Manager you want to
assign it to.
6
In the Gateway Types window, select the Novell Printer Gateway.
For more information about using gateways, see
Gateway to Use" on page
7
Configure the PDS by selecting the Printer Type and Port Type and then
click OK.
8
Configure the Connection Type as Remote and specify the Port Type as
LPT, COM, or Other. Then click Next.
9
In the PServer Emulation field, modify or use the default SAP Name,
specify a Printer Number, if needed, and specify any address restrictions
you want to impose for this printer. Then click Next.
10
Configure the Controller Type and Interrupts, if needed, and then click
Finish.
11
Select the printer driver for each client operating system.
These drivers will be automatically downloaded to users' workstations
when they install this printer in the future. Select a driver for each
operating system.
If you choose a Windows 3.x driver but not a Windows 95/98/ME or
Windows NT/2000 driver, a 16-bit driver will be selected. Normally this
will not create problems.
Since the list of printer drivers shipped with this product is limited, you
can add drivers to the Resource Management Service database. (See
"Adding or Updating Printer Drivers" on page 96
If the driver you need is not in the drivers list, rather than adding it to the
RMS, you can select [None] at the top of each list. Users will then be
asked to provide a disk with the appropriate driver the first time they
install this printer on their workstations.
12
Click OK.
The main browser window appears with your new controlled access
printer listed.
135.
"Selecting the Correct
for more information.)