Novell NETWARE 6-DOCUMENTATION Manual page 956

4
Select a target from the Target Services list.
The following table describes the targets that can be selected for backup.
If you are Backing Up
Cluster-enabled pools
The file system
The eDirectory database
A workstation
Server-specific
information
5
When prompted, enter the username (and context, if required) for the
target.
If SBCON rejects the username you entered, you probably need to
include the context where the User object is located. For example, instead
of entering ADMIN as the username, enter
.CN=ADMIN.O=company_name or .ADMIN.company_name.
You must include the context in the username at this point if the username
you use exists in an eDirectory container that is different from the bindery
context set on the server running the engine.
6
(Conditional) If requested, enter the password for the target.
SBON will take a few moments to attach to that target.
If you select the default values on this form, a full backup of the source is
performed. Otherwise, if you want to perform an incremental or
differential backup, select Advanced Options.
7
Click What to Backup and press Enter.
8
Press Insert, select the volumes and files you want to back up from the
screen, and press Esc.
The selected volumes and files appear in the List Resources screen.
9
Enter a descriptive name for the backup session in the Description field.
Then Select
The cluster-enabled pool you want to back up
The server whose file system you want to back
up
The server with TSANDS loaded
The workstation's host server, and then the
workstation
The server whose server-specific information
you want to back up, and then choose to back up
the file system.
51
Setting Up