E4. Job Printed This Time But Nothing Was Changed; E5. Job Did Not Print And Is Still In The Job List; E6. Job Did Not Print But Is No Longer In The Job List - Novell NETWARE 6-DOCUMENTATION Manual

E4. Job printed this time but nothing was changed

E5. Job did not print and is still in the job list

E6. Job did not print but is no longer in the job list

If the job printed now, there is no authoritative explanation as to why it didn't
print the first time. If you followed these steps, no configurations have been
changed; the job was only paused and released. Try printing the job again and
see if normal printing continues. If not, try pausing the printer again and see if
any other symptoms occur.
If the job does not print and is still in the job list, then check for job holds,
delays, and priority settings.
If the job did not print, but it is not in the job list, then the job was sent to the
printer and no error was reported back to the system. Check these issues:
Are you are checking the correct physical printer?
Are you are using the correct print driver in your application?
Are your drivers and printers talking the same language (for example
Postscript or PCL)?
Troubleshooting Your Print System 125