Cluster E-Mail Notification - Novell NETWARE 6-DOCUMENTATION Manual

Cluster E-Mail Notification

To change the priority for a resource, select the resource in the list and
4
then click the Increase or Decrease button to move the resource up or
down in the list.
This lets you change the load order of the resource relative to other cluster
resources on the same node.
You can also select a resource and then click the Selected button to reset
the resource back to its default load order.
Click the Apply button to save changes made to resource priorities.
5
Using NetWare Remote Manager
On the left column under the Clustering section, click Cluster Config.
1
Select the Cluster object name.
2
Click Resource Priorities.
3
To change the priority for a resource, assign it a number between 0 and
4
65535.
65535 is the maximum value and 0 is the minimum value. Setting a
resource priority to 65535 ensures the resource loads before other
resources with lower priority settings. Setting the resource priority to 0
ensures the resource loads last after all other resources have loaded. The
default resource priority setting is 0.
If you assign multiple resources the same priority, the start order of those
resources is random.
Click the Apply button to save changes made to resource priorities.
5
Novell Cluster Services can automatically send out e-mail messages for
certain cluster events like cluster and resource state changes or nodes joining
or leaving the cluster.
You can enable or disable e-mail notification for the cluster and specify up to
eight administrator e-mail addresses for cluster notification.
Using ConsoleOne
Right-click the cluster object
1
Click Properties.
2
Installation and Setup
3 9