Configuring Ftp Server Load And Unload Scripts - Novell NETWARE 6-DOCUMENTATION Manual

Configuring FTP Server Load and Unload Scripts

Select and right-click the Cluster Volume object and then click Properties to
find the Cluster Resource Load Script and Cluster Resource Unload Script.
Load and unload scripts are required by Novell Cluster Services to start and
stop the FTP server.
1
To the load script, add the following at the end of the existing script:
NSS /ACTIVATE=VOLUME
MOUNT VOLUME
ADD SECONDARY IPADDRESS A.B.C.D
NWFTPD
2
To the unload script, add the following at the beginning of the existing
script:
UNLOAD NWFTPD
DISMOUNT VOLUME /FORCE
NSS /FORCEDEACTIVATE=VOLUME
DEL SECONDARY IPADDRESS A.B.C.D
Replace VOLUME in both the load and unload scripts with the name of
the shared disk volume where webroot exists. Replace A.B.C.D with the
secondary IP address assigned to the FTP server cluster volume object.
This is the IP address that will move with the FTP Server during failover
and failback. The NWFTPD command is omitted in ACTIVE/ACTIVE
mode.
Configuring with Cluster Services
49