Novell NETWARE 6-DOCUMENTATION Manual page 1320

ConsoleOne- Based Management for NIS Server
4
Make sure NISSERV.NLM is loaded.
5
Run MKSLAVE, to setup the NetWare machine as slave, with the
following parameters:
mkslave -d domainname -m master [-x contextname]
Setting Up a NetWare Server as NIS Client
1
Run NFSSTOP.
2
In the NetWare server, make sure that the parameter
NIS_CLIENT_ACCESS=1 in the file SYS:\ETC\NFS.CFG.
3
Run NFSSTART.
4
Set the default domain by entering
ypset domainname hostname/IP_address
Nis Server Configuration Parameters
To Configure The Parameters Required For Nis Services, Right-click The
Nisserv_servername > Click Properties. A Panel Similar To The Following
Appears:
Figure 14 Nis Server-general Parameters Panel
Working with UNIX Machines
97