Novell NETWARE 6-DOCUMENTATION Manual page 989

Viewing Job Details
84
Storage Management Services Administration Guide
This screen gives you all the details of the job you submitted including job
name, the time the job was submitted, and the time the job should be executed.
You can also schedule the job to run at a predefined time again after its
execution.
You can view job details from the server or a workstation.
Ensure that you have met the prerequisites detailed in
SBCON Tasks" on page
From the Server
1
Select Main Menu > Job Administration > Current Job List.
2
Select one of the jobs listed and press Enter.
The Job Details screen appears displaying the following information:
Job Name—A descriptive name of the job for your identification.
You can change the name if you want to reschedule the job and run
it again.
Disabled— Indicates whether the job is disabled. If it is, this field
displays Yes; if enabled, it displays No. Updates to this field depend
on the job status. If the job status is Could Not Finish, the
message is Yes. You can perform the required troubleshooting and
change this field to No, subsequently allowing the job to execute.
After completion of the job, the Disabled field indicates Yes.
Submitted By—The name of the server where you have submitted
the job. If you submitted the job from a client, it displays the name of
the workstation and is the same as the Owner in the Queue Jobs
screen.
Submitted at—The date and time the job was submitted. The
execution time could be different depending upon the specifications
you defined in Execution Time and Scheduling Options in the same
screen.
Entry Open—The status is Yes when the job is active and No when
it is inactive. This is one of the fields that is updated automatically.
Execution Time—An option to give the time and date when you
want the job to run. It is the same as the Execution Time in the
Advanced Backup Options form.
81.
"Prerequisites for