Setting Up Ndps On Your Servers - Novell NETWARE 6-DOCUMENTATION Manual

Setting Up NDPS on Your Servers

Workstations" on page 68
on page 69
Novell Client 32: The Novell Client is required in order for NDPS
features to be available on your client workstations. Other clients can
print to NDPS printers through the backward compatibility feature,
but only NDPS clients can take full advantage of the advanced
features offered by NDPS.
See "Preparing Client Workstations to Use NDPS" on page 69
more information.
NOTE:
If users will be accessing printers through iPrint, you do not need to
install the Novell Client. For more information on iPrint, see
on Client Workstations
5. Install printers on individual workstations.
You can do this in any of the following ways:
If you are using iPrint, see
in the iPrint Administration Guide for more information.
Designate printers to be automatically installed on users'
workstations through the NDPS Remote Printer Management feature
available through iManage. See
Automatically Installed" on page 75
Install printers manually on each workstation using the Windows
Add Printer function in the Printers folder.
During the initial installation and setup process, there are some issues you
should be familiar with:
"Rights Required for Configuring NDPS Installation" on page 60
"Using iManage" on page 60
"Changing the Location of a Broker" on page 60
"Updating the AUTOEXEC.NCF File" on page 60
and "Setting Up LPR Clients on UNIX"
for more information.
in the iPrint Administration Guide.
Setting Up iPrint on Client Workstations
Setting Up a New NDPS Printing System
"Designating Printers to Be
for more information.
for
Setting Up iPrint
59