Novell NETWARE 6-DOCUMENTATION Manual page 1269

Sample Configuration File
46
Novell Native File Access Protocols Installation and Administration Guide
-UNICODE
When On (enabled), this command enables Unicode characters (used in
double-byte languages).
Value: On | Off
Default: Off (disabled)
IMPORTANT:
To support Unicode, an additional file named UNINOMAP.TXT
must be created and saved in the SYS:\ETC directory. When the -UNICODE value
is set to On, the UNINOMAP.TXT file is used to resolve Unicode-to-ASCII "no-
map" problems.
To specify "no-map" cases in the UNINOMAP.TXT file, enter the first Unicode
value to watch for and then the second value representing the ASCII replacement
code. For example:
0178 98
20AC CC
Save the values in the UNINOMAP.TXT file. If an unmappable character is
encountered, the system uses the ASCII substitution character specified in the file.
#This name will display in Network Neighborhood with the
#following comment.
-SERVERNAME 'NW6-NNFAP'
-COMMENT 'Server running Novell Native File Access Protocols'
#Novell Native File Access Protocols is configured to use
Local #authentication.
-AUTHENT LOCAL
#The workgroup name is ONENET.
-WORKGROUP 'ONENET'
#When this volume is mounted, the local path CIFSVOL:\ will
appear as a sharepoint named Graphics Volume with unlimited
connections (0) and its corresponding comment.
-SHARE 'CIFSVOL:\' 'Graphics Volume' 0 'Lots of image files'